Patrick
08-06-1999, 07:38 AM
http://www.thunting.com/geotech/forum/sonar/images/TailJig1x.jpg
../images/TailJig1x.jpg
You'll notice the jig in the center of the photo. It is basically a piece of molding (90 degree) nailed to a board with the correct measurements to make the cuts.
Patrick
../images/TailJig1x.jpg
You'll notice the jig in the center of the photo. It is basically a piece of molding (90 degree) nailed to a board with the correct measurements to make the cuts.
Patrick