Buy Cheap ebay or Garrett ACE ? Or build PI ?

(1/1)

quagmeister:
(Another) Just Joined  relative newbie, with almost the Usual Question... 

Retired Old Grump, Western side of Oz.  Have been given a - working -  Garrett Groundhog ADS, but the depth and response is not much better than my  PI kit of over 35 years ago.
 Sometime next winter we'll be up on the goldfields  (read,  mineralized ground...)   so I need a better detector than the Groundhog.

 At the moment,  Garrett  ACE series are looking attractive on the basis of  proven brand/product/value/support,  though this pensioner-Scrooge remembers how cost-effective that kit-built machine was, and how 'tempting'  those  $180 ebay chinese machines  are looking...
   Has anyone here bought & used one ? - and brave enough to admit it ???  :D

You are not allowed to view links.
Please Register or Loginhttps://www.ebay.com.au/itm/Deep-Sensitive-Minelab-Metal-Detector-Pinpointer-Gold-Treasure-LCD-Waterproof/173407099816?hash=item285fde5ba8:g:z~IAAOSw~TNbRxqZ


 My second choice would be another PI, build-it- myself.  They work well in mineralized soils and great on beaches. Any proven, easy to build kits around ? 

I can see the Garrett being a near-certainty, unless there's something better at the price point.   Ending up with 2 or even 3 machines is not a problem, as a farmer-friend will happily accept the cheapest one for round the paddocks hunting... like that $60  drawbar pin he dropped into the fresh furrows... :-\


Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,67711.msg325443.html#msg325443

Homefire:
Welcome to the forum.  

Of the machines you mention the best Proven Gold machine is the 15 Khz Ground Hog .  I have the American S3 lower power version.  15Khz does quite well.
  
The Ace is a fine all round machine but not going to be a getting er on the small gold running 6.5.  

I would avoid the Chines Clones like the Plague.  Most only look like that there meant to be like and nothing the same in circuitry.    

What PI machine did you build back when ?

What sorta Electronics back ground and skill would you say you possess ?  Do you have a bit of gear and test equipment  ?  Minimum of  a DVM and Two Channel O Scope ?  Basic requirement on any of the more complicated DIY Builds.  

There are a pile of Some What Simple PI Kits or at Least PCB available.
  
I've built the Surf PI,  Not much more then a handy dig it all coin machine.

The Barracuda, Much better Beach Type Coin Machine.  Works fine for Tot Lots if you dig it all like I do.

The Pulse Mini in various stages of Completion , Way more capable coin machine with possibilities of  larger Gold with some tinkering in reach.  Set up as to can run DD coils.  You can find more information on these machines by searching this site in box above.   Or half way down on this GeoTech Site Page.  You are not allowed to view links.
Please Register or Loginhttp://www.geotech1.com/forums/forum.php


Of any of the current PI kits or PCB's available to most sophisticated and capable Gold Machine looks like the Mirage.  Yea I have that PCB setting her waiting for the Some Day to come along.  LOL   You are not allowed to view links.
Please Register or Loginhttps://www.treasurelinx.com/mirage_pi_2.html


If your serious about finding Gold you need a Dedicated Gold Machine in your mix.  My Whites GMT does that for me.  




Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,67711.msg325447.html#msg325447

seanengman:
Homefire, I think you just sold me on building the Pulse Mini.

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,67711.msg325456.html#msg325456

Homefire:
Cool beans.  Easy Build.  One or two nights tops.  I had all the parts on hand but a few.  Just ordered the PCB.  Goty lucky and caught a Whites Yard sale TDI Super 150  for like $35.00 ?  

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,67711.msg325461.html#msg325461

quagmeister:
The metal detector was from some obscure electronics magazine,  one of many floating around back in the day., I think...   It WAS  a long time ago... 40 years+
After that I built a  ETI 549 for myself.  Sensitivity was...acceptable.  Setting up the coil overlap was the biggest nuisance and that defined performance.  A few years ago I found a partially built ETI 1500  VLF/TR, and in a most UN-characteristic moment....threw it out.   :o
 Anyway,  it's a bonus to hear that the Vintage Garrett Groundhog might still be a viable machine...

 Background:-  Self-taught, have built several valve amplifiers... before those new-fangled  "tran-zis-stars"  turned polarity as well as theory upside down.  Builder of kits, a couple of home-brews  - Infra-red triggered IGN system for an outboard motor being my  'magnum opus'.   However, despite this,  to  'Rise in the World' I chose Printing.  That did prove useful in making my own PCBs,  reverse-engineering magazine  pics of boards into actual tracks and making negatives/exposing/etching them.
 So yes, I can stick wires to copper pads and work out which way the eleck-trickery goes...
 But, at this end of Life,  the more that comes ready-made or simply made,,,, the better.  Which is why I've always 'approved' of the PI machines for DIY... only ONE winding makes the search-coil and NO CRO  needed to set it up !!!
  In a moment of madness last night I let myself buy a   Surf PI kit on evilBay, so we'll see how that works.

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,67711.msg325479.html#msg325479

seanengman:
Yeah, I have a couple Surf PI boards in a box somewhere. If I find them, I will build them. But right now I'm thinking that the PulseMini (or three) will be my winter project.

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,67711.msg325482.html#msg325482

Homefire:
LOL, Sounds like my thinking.  When ever I buy a PCB I always buy at least two.  The Baracuda and Chance I have being being exceptions.  They were gifted to me.  Same with Components.  If I need two order at least 10 or 20 ?  Ever notice when you get on a project you seem to have Every Part required but ONE ? 

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,67711.msg325488.html#msg325488

Navigation

[0] Message Index