Hey Ladies and gentlemen??After much thought I have decided that I should add a little to this thread. My dowsing position used to be with my arms at shoulder height and push out as far as I could. My 14 ? inch rods would be closed when my heel was on the target. After having a stroke and finding that the rods would not work I had to make some changes.
My new position is with my elbows tight against my rib cage. I now need to use a 9 ? inch rod?.
.Take masking tape and put a large X on the rug or on the patio. Use a compass to put the tape in a North-South and East- West positions?Put a target in the middle of the X then walk a few feet from the target. When the rods close mark the spot. Do this on all four ends of the tape. Tell me if they are crossing the same distance from the masking tape each time. Then put your heel on the target. If the rods are not crossed move your arms in and out and see if there is one spot where they are crossed. Let us know how this experiment comes out?
When the rods cross you stop and square your body to the line. Turn 90 degree?s your rods should open?Then there are two option?s that can be used to follow the signal line?Walk a S pattern to the target?That?s what I recommend. You can also move your hands closer to each other and see if the rods will form a vee shape for you. If the vee shape forms adjust your hands until the tips are about two inches apart. Now just walk directly to the target keeping the tips in the right place.
The best way to practice this is put a target on the ground?Go 30 feet or more. Find the signal and mark it?.Run a string or rope from the mark to the target..I have a photo of the S pattern that came with a tool I bought
Ok?For me each object puts a signal line out in a North-South and East-Direction. So when you are following a signal line you may encounter a line from another object. When I am following a signal line and the rods cross I am not always sure that I have found the target . To make sure that it is the signal that I was following I take a few more steps and turn 90 degrees. I then drop one rod to my side. The up rod will always point to the target. Switch the rods and see if the other rod points the same as the other one?I can only write about how dowsing works for me..If this will work for you it sure beats the heck out of digging an extra hole
Linkback: You are not allowed to view links.
Please Register or Login
http://www.thunting.com/smf/index.php/topic,104.msg141126.html#msg141126
|
|
|
Logged
|
|
