AVR and 3D visualizer okm

(1/2) > >>

mahmud121:
Hello freinds:

I want to connect pi metal detector 0-5volt dc opamp out put to future2003 okm via usb port by atmega32 or atmega8 and ft232bm.I know that the future2003 okm get the digital signal for 0-5vdc and 0-1 vdc show blue color in future2003 okm and 1-3vdc green color and 3-5vdc red color.i wrote a program for the avr but i have problem in it.please help me to weirt the correct and compelet program.

$regfile ="M8def.
crystal = 8000000
$buad = 9600
Config Serialout = buffered , Size = 10
Dim A as word
Dim b as single

A = 0

main

printbin A

Do
A = Get adc(0)
Wait 10
B = A * 204.8
print b
Loop
End



Thanks for helping








Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,16351.msg104955.html#msg104955

GoldDigger1950:
Mahmud, I don't believe you will find too many programmers here. You would be better served to go to an Atmel forum. I use PICs rather than Atmel and I do understand what you are asking but I am not familiar with Atmel code.

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,16351.msg105151.html#msg105151

mahmud121:
Thanks gold digger

Noproblem,the pic is good too.if you have idea with pics in the matter please tell me too.

Best regards

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,16351.msg105197.html#msg105197

GoldDigger1950:
I think you should use a mini laptop and the program that works on Windows. A small controller data logger still has to be uploaded to a bigger computer later. Why not just use one of those small traveling laptops?

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,16351.msg105321.html#msg105321

mahmud121:
Hi

The mini laptop and pc both are use for this project.i have mini laptop too.The main role is the program for the microcotroller to make the usb data logger for connection between pi metal detector output opamp and 3dvisualizer okm via usb data logger.I am trying to write the program for it.

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,16351.msg105350.html#msg105350

GoldDigger1950:
Are you telling me that the OKM machine didn't come with data logging software?

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,16351.msg105467.html#msg105467

mahmud121:
NO. i want to make a module for all pi detector can come from analog system to imagine metal detector.








Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,16351.msg105477.html#msg105477

GoldDigger1950:
As an experienced engineer with a lot of experience with PIC chips, I believe I can safely say that your project is probably too complex for this forum. Try the AVR forums.

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,16351.msg105486.html#msg105486

mahmud121:
ok,
thanks for your advise

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,16351.msg105491.html#msg105491

mouaoued:
HELP PLIZ CRACK OKM EXP5000

Linkback: You are not allowed to view links.
Please Register or Loginhttp://www.thunting.com/smf/index.php/topic,16351.msg161806.html#msg161806

Navigation

[0] Message Index

[#] Next page