[x] Welcome at THunting.com!

A fun place to talk about Metal Detecting, Treasure Hunting & Prospecting. Here you can share finds and experience with thousands of members from all over the world

Join us and Register Now - Its FREE & EASY

THunting.com
Treasure Hunting & Metal Detecting Community
   
Advanced Search
*
Welcome, Guest! Please login or register HERE - It is FREE and easy.
Only registered users can post and view images on our message boards.
Did you miss your activation email?

Login with email, password and session length
Or Login Using Social Network Account
2
News:

Coinmaster 5000 GEB
Description:

From the Archives of 1980 . 2 pages for repair or studying .


You are not allowed to download files
Views: (1826)  Downloads (689)  Last Download: January 09, 2024, 03:46:41 pm 
Previous Download | Next Download

Posted by: Eugene52 May 17, 2011, 12:38:19 pm

Rating: ***** by 5 members.

0 Members and 1 Guest are viewing this files.

Comments
echoshack
Posts: 1
February 24, 2012, 12:08:51 am
Thanks to Eugene52 now I have the schematic I can look at some mods maybe a micro  to drive the TX coil and vary the frequency. Some analogue inputs to monitor parts of the circuit. As a tip the 1 meg resistors may go higher value over time due to ageing. The higher the value of a resistor the more likely to ageing on a 30 yr old circuit. As they are used in setting the gain of the amplifiers the gain will increase with ageing and may become unstable. R53 carries a high current to switch the TX coil so this may have also gone high with a lot of use. Hope this helps.
Last modified by: echoshack February 24, 2012, 12:10:17 am

Add Comment
Your comment will not appear until it has been approved.


Powered by SMF 1.1.19 | SMF © 2005, Simple Machines | Sitemap
Copyright THunting.com