Hello There was a post a while back in relation to this First Minelab Detector
and one has fallen in my hands to be repaired I got it going and it seems to be an easy board to repair
but it has a lot of wires and the three for the headphone jack were not install properly by the previous person looking at it
They are on the Pic (Number 9000-4) Brown-Red-Black wires and I think the actual Jack solder contacts were Red-Black-Brown wires
for the Headphone has not been wired up properly since it's shorting when you plug a headphone they use Stereo system.
My quest is if someone has this model in original wiring state to take a note or pics of the color wiring contacts on the board
specially the speaker and headphone three wire contacts,on the left like my pic.And if you can make a pic of the solder contacts
on the actual Jack with the color wires showing That would be great I have left it on the side until maybe someone does this.
Before spending a lot more time trying to find how it was originally.I'm putting up a few pics of both sides of the board.Thank you
Linkback: You are not allowed to view links.
Please Register or Login
http://www.thunting.com/smf/index.php/topic,37174.msg228572.html#msg228572
There are 4 attachment(s) in this post which you can not view or downloadPlease register for viewing them. Goldseeker 3D 9000-2.JPG Goldseeker 3D 9000-3.JPG Goldseeker 3D 9000-4.JPG Goldseeker 3D 9000_01.JPG
|
« Last Edit: July 20, 2012, 03:04:23 am by conan »
|
Logged
|
|