| | Quote: | | | Posted by davidbat40 | | | |
| after takeing my hawkeye panel off today for gb mod (AM) see next post down found a loose wire anybody help can not trace were it should go (DETECTOR NOT WORKING)the photo shows the black wire solder point NEED HELP QUICK
| |
| | |
Hello davidbat40. The photo does not show very much . You should get your voltmeter and check if you have supply voltages -5 , +5 or any other voltages across the circuit board , check your battery . Where does the black wire come from ? Is the circuit powered on ? The wire may of pulled off when you disassembled your detector . Look on the bottom of the PC board for a soldered wire that has nothing on the top side or a soldered area with a tiny hole through it . Chances are the soldered wire did not pull through unless the detector has poor / bad solder joints .
Regards........Eugene
Linkback: You are not allowed to view links.
Please Register or Login
http://www.thunting.com/smf/index.php/topic,6385.msg38667.html#msg38667
|
|
Logged
|
Let's Talk Treasure right here on Thunting.com
|