Whites AT3 Schematic needed

I did not' see any #s I'll try with Mag glass.

Posted on: July 31, 2012, 10:52:19 PM

---

No such luck the connector is a square white plastic with no #s and the board isn't numbered either. 4 pins on circuit board wire are sheild-red-white and Black. I have no idea what color wires Garrett uses for TX or RX I'm afraid if I put 3 new 9v batteries in the unit with the wrong positions they may do damage to the detector what do you think trial and error?

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,37291.msg229488.html#msg229488

Garrett sent me a picture of the plug attached to the board I followed there wire positions but it still not working, I think I'm going to send unit to Garrett to see if the coil or control box. Do you know of any coils for sale that would work with the AT3?  Thanks again for all your time and help I really do appreciate it. Al

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,37291.msg229693.html#msg229693

Hi, Did you mange to get your Beachhunter AT3 going again ? I had a similar problem it turned out to be a dead coil, got a second hand coil from another person in our local club & tried it, goes well.
Please let me know if you still need a photo of the plug or circuit board and will sent one to you
Cheers from Hobbit land down under
Kiwi

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,37291.msg243353.html#msg243353