[x] Welcome at THunting.com!

A fun place to talk about Metal Detecting, Treasure Hunting & Prospecting. Here you can share finds and experience with thousands of members from all over the world

Join us and Register Now - Its FREE & EASY

THunting.com
Treasure Hunting & Metal Detecting Community
   
Advanced Search
*
Welcome, Guest! Please login or register HERE - It is FREE and easy.
Only registered users can post and view images on our message boards.
Did you miss your activation email?

Login with email, password and session length
Or Login Using Social Network Account
2
News:
Pages:  1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35   Go Down
Print
Share this topic on FacebookShare this topic on Del.icio.usShare this topic on DiggShare this topic on RedditShare this topic on Twitter
Tags:
0 Members and 1 Guest are viewing this topic.
Offline ramTopic starter
Silver Member
*

Join Date: Jul, 2007
Thank you148

Activity
0%

Portugal
Posts: 814
Referrals: 0

5270.00 Gold
View Inventory

Awards
« Reply #30 on: November 12, 2010, 07:26:43 pm »
Go Up Go Down

hello xavier, in my dp harness going to coil i use rg58 50 ohm belden coaxial cable w/c i think maybe better than ordinary wire coz it is thickly shielded braid. is this true?

regards, ram,

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,17174.msg125712.html#msg125712




Logged
Offline xavier
Platin Member
*

From a rainy Brussels
Join Date: May, 2009
Thank you166

Activity
0%
Male
Belgium
Posts: 7339
Referrals: 0

32206.00 Gold
View Inventory

Awards
« Reply #31 on: November 13, 2010, 04:34:40 am »
Go Up Go Down

Hi Ram

Coaxial is good just don't make it to long what I do is measure the resistance of the coil with my length of cable attached to it. Also you must keep the capacitance in mind RG58U is 28.5pf per ft  RG6A/U is 13.5 pf per ft a lower capacitance is better.

Regards Xavier

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,17174.msg125753.html#msg125753


Xavier


Logged

So many questions so little time

Offline ramTopic starter
Silver Member
*

Join Date: Jul, 2007
Thank you148

Activity
0%

Portugal
Posts: 814
Referrals: 0

5270.00 Gold
View Inventory

Awards
« Reply #32 on: November 13, 2010, 08:53:28 am »
Go Up Go Down

thank you xavier,

regards, ram,

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,17174.msg125760.html#msg125760




Logged
Offline danny475
Copper Member
*

dont go away when you hunt a expansive thing
Join Date: Jul, 2010
Thank you0

Activity
0%
Male
Syrian Arab Republic
Posts: 82
Referrals: 0

530.00 Gold
View Inventory

Awards
« Reply #33 on: November 13, 2010, 11:27:36 am »
Go Up Go Down

hi
yes it is for a pi detector
i have build the gary's pi metal detector and it was worst knowing that the coil was perfect 0.8mm i made several coils
and now i make the dp delta pulse and it was grate so you know in some countries it is forbiden to hunt or to sell any thing
in my country it is forbiden and if i'm coted they will rest me for 15 years minimum
so i need a coil that i can package it in a smal bag
i was thinking to put the coil in an ampty fishing rob and when i go to the hunting place i can get out my coil and fix it on the four fishing pistones they will be in the fishing rob
so i need a 110cm coil or 125cm coil can you help me for that
 

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,17174.msg125777.html#msg125777




Logged
Offline ramTopic starter
Silver Member
*

Join Date: Jul, 2007
Thank you148

Activity
0%

Portugal
Posts: 814
Referrals: 0

5270.00 Gold
View Inventory

Awards
« Reply #34 on: November 13, 2010, 11:15:07 pm »
Go Up Go Down

hello in my country very funny, you can do what you want specially metal detecting you can do build any type of metal detector,(the problem is the availability of electronic parts so many counterfeit parts) you can bring your md where ever no metal detector law. but if you can detect metal and unearthed is precious metal immediately there's a law if the unearthed is iron there's no law and the expectators will laugh at you.

regards, ram,

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,17174.msg125875.html#msg125875




Logged
Offline xavier
Platin Member
*

From a rainy Brussels
Join Date: May, 2009
Thank you166

Activity
0%
Male
Belgium
Posts: 7339
Referrals: 0

32206.00 Gold
View Inventory

Awards
« Reply #35 on: November 14, 2010, 11:43:57 am »
Go Up Go Down

Hi Danny475

I think that the best thing for you to do is turn your fishing rod into a pin pointer other than that I don't quite see how you're going to hide a 1.25m coil. Any how you can try a coil with 6 - 11 turns of 0.5mm magnet wire, that should get you going for a start.

Regards Xavier   

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,17174.msg125929.html#msg125929


Xavier


Logged

So many questions so little time

Offline danny475
Copper Member
*

dont go away when you hunt a expansive thing
Join Date: Jul, 2010
Thank you0

Activity
0%
Male
Syrian Arab Republic
Posts: 82
Referrals: 0

530.00 Gold
View Inventory

Awards
« Reply #36 on: November 14, 2010, 12:50:31 pm »
Go Up Go Down

ok
they say that for a 1*1m coil you have to wind 16 turns of 0.5mm megnatic wire and when you want to increis the coil mesurment for ex: if you want to make a 150*150cm \1.5*1.5m you have to use less turns from the 1*1m coil
and if you want to make a 10cm diamiter coil you have to wind perhaps 40 turns of wire
so i want the relation between this two coils
thanks
tc danny

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,17174.msg125935.html#msg125935




Logged
Offline xavier
Platin Member
*

From a rainy Brussels
Join Date: May, 2009
Thank you166

Activity
0%
Male
Belgium
Posts: 7339
Referrals: 0

32206.00 Gold
View Inventory

Awards
« Reply #37 on: November 14, 2010, 01:54:25 pm »
Go Up Go Down

Danny if you have a schematic and they tell you to wind 15 turns on a former of 200mm (20cm) you can work out the length of wire used in the coil the formula is pi * D so one turn of the coil is 3.1416*20 =  62.832 cm for one turn so we have 15 turns*62.832 = 942.42 cm so if you want to make a coil of 50 cm in diameter you need to take the length of wire in one turn that will be 50*3.1416=157.08 so you take the 942.42/157.08=5.99 turns in other words 6 turns but you must remember that you will not have the same inductance in the coil Good luck mate

Regards Xavier

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,17174.msg125946.html#msg125946


Xavier


Logged

So many questions so little time

Offline danny475
Copper Member
*

dont go away when you hunt a expansive thing
Join Date: Jul, 2010
Thank you0

Activity
0%
Male
Syrian Arab Republic
Posts: 82
Referrals: 0

530.00 Gold
View Inventory

Awards
« Reply #38 on: November 14, 2010, 01:59:30 pm »
Go Up Go Down

thanks to you
nice information and teories
thannnnnnnnnnnnks


Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,17174.msg125950.html#msg125950




Logged
Offline freedan3d
Copper Member
*

Join Date: Nov, 2010
Thank you11

Activity
0%

Iran, Islamic Republic of
Posts: 29
Referrals: 0

155.00 Gold
View Inventory

Awards

pulse 2
« Reply #39 on: November 20, 2010, 02:51:51 pm »
Go Up Go Down

hi to all
i maked a gary's pi detector . it worked good.
It detected a ring from 8 inch in air
what result you get whith this detector?
how good is this ?
how deep?

tnx


Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,17174.msg127081.html#msg127081




Logged
Print
Pages:  1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35   Go Up
Jump to:  

Powered by SMF 1.1.19 | SMF © 2005, Simple Machines | Sitemap
Copyright THunting.com