[x] Welcome at THunting.com!

A fun place to talk about Metal Detecting, Treasure Hunting & Prospecting. Here you can share finds and experience with thousands of members from all over the world

Join us and Register Now - Its FREE & EASY

THunting.com
Treasure Hunting & Metal Detecting Community
   
Advanced Search
*
Welcome, Guest! Please login or register HERE - It is FREE and easy.
Only registered users can post and view images on our message boards.
Did you miss your activation email?

Login with email, password and session length
Or Login Using Social Network Account
2
News:
Pages:  1 ... 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 ... 91   Go Down
Print
Share this topic on FacebookShare this topic on Del.icio.usShare this topic on DiggShare this topic on RedditShare this topic on Twitter
Tags:
0 Members and 1 Guest are viewing this topic.
Offline Wilson
Pull Tab
*

Join Date: Jul, 2010
Thank you2

Activity
0%

Brazil
Posts: 23
Referrals: 0

130.00 Gold
View Inventory

Awards

Delta Pulse stage assemply
« Reply #460 on: October 28, 2010, 10:39:25 am »
Go Up Go Down

Hello Ram, I'll check the forum.
Thanks Wise

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,28024.msg198929.html#msg198929




Logged
Offline Wilson
Pull Tab
*

Join Date: Jul, 2010
Thank you2

Activity
0%

Brazil
Posts: 23
Referrals: 0

130.00 Gold
View Inventory

Awards

Delta Pulse stage assemply
« Reply #461 on: October 29, 2010, 05:04:15 pm »
Go Up Go Down

Tradu??o do portugu?s para ingl?s
Hello everyone, I changed a section of the circuit by adding a capacitor in series with the gain potentiometer to prevent possible dc level, this modification was suggested by a member of the site which I can not remember the name.
This modification improved the gain adjustment circuit stability and very good, I thank the author of the modification. Pray

 Detecting
Frequency 120Hz not know if it is correct for the diameter of the coil but is working well.

R5 and R6 ---1k  1W
30cm diameter coil wire .5 mm 3.7homs
Replaced by TL062 for TL072

Gold ring 27cm in air
Beer can 80cm in air
Paint Bucket 1 / 4 1mt

Note: The capacitor is suggested by the author 220nF,replaces 470nF polyester I installed worked very well.

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,28024.msg198930.html#msg198930



There are 2 attachment(s) in this post which you can not view or download

Please register for viewing them.

DeltaPulse-one error corrected.jpg
Replace jumper with capacitor.jpg


Logged
Offline cuirava
Bronze Member
*

Join Date: Jul, 2010
Thank you1

Activity
0%

United States
Posts: 264
Referrals: 0

620.00 Gold
View Inventory

Awards

fisher
« Reply #462 on: October 30, 2010, 03:47:19 pm »
Go Up Go Down

you'r close to a wizard! Grin

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,28024.msg198931.html#msg198931




Logged
Offline vourvon
Bronze Member
*

Join Date: May, 2009
Thank you11

Activity
0%
Male
Philippines
Posts: 147
Referrals: 0

475.00 Gold
View Inventory

Awards

MD-5008, V4 Automax & Nokta Golden King
« Reply #463 on: November 01, 2010, 08:01:27 am »
Go Up Go Down

Hello,

    Anybody can post here the procedure step by step on how to do after turn on the power of Delta Pulse and what is the function of all knobs. Thanks in advance.

vourvon

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,28024.msg198932.html#msg198932




Logged
Offline japanese
Bronze Member
*

Join Date: Mar, 2010
Thank you55

Activity
0%

Egypt
Posts: 287
Referrals: 0

1625.00 Gold
View Inventory

Awards

GARY PI
« Reply #464 on: November 01, 2010, 08:41:11 am »
Go Up Go Down

Hi vourvon
     Look at ver 6 . Starting from the left is  [noise] is P3 = 20K ohm and is the pulse-width power adjustment . The next one over is [sens] is P2= 500K ohms and it is the timing range adjust for the second delay pulse start . The next is [Gain]  is P4 =20K ohm  adjusts input signal to I.C. D5A =TL062 . The next is the audio [Threshold] P5= 10K ohm . The last volume control is P6=1k is not shown on the schematic.
 
 after turn on the power of Delta Pulse ,press reset for secand,you see metar move
 to left and back to right at 0.after that no sound, adj p1~p6 .

every p from p1~p6 has scale 0~10
p3=3~6,p1=3~6,p2=1,p4=6,p5=1,p6(vol).

 after adj. you hear 3 sound Regular per sec.if a metal near the coil you hear
 Fast sound depend on where the metal from the coil.
 BEST TIME
  J.
 

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,28024.msg198933.html#msg198933




Logged
Offline Engr Obaid
Copper Member
*

Join Date: Feb, 2010
Thank you3

Activity
0%
Male
Pakistan
Posts: 35
Referrals: 0

190.00 Gold
View Inventory

Awards
« Reply #465 on: November 01, 2010, 10:22:06 am »
Go Up Go Down

Dear,

 Recently I made the latest Delta Pulse which is available from the site
 

You are not allowed to view links.
Please Register or Login

It is very nice circuit to made, I was having  problem with old version of Delta Plus


BR,

Obaid


Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,28024.msg198934.html#msg198934



There are 4 attachment(s) in this post which you can not view or download

Please register for viewing them.

altyol.pdf
aç?k?ema.pdf
malzeme listesi.pdf
yerlesim (1).pdf


« Last Edit: December 31, 1969, 06:00:00 pm by Engr Obaid »
Logged
Offline hesamavr
Copper Member
*

Join Date: Aug, 2009
Thank you10

Activity
0%

Iran, Islamic Republic of
Posts: 56
Referrals: 0

310.00 Gold
View Inventory

Awards
« Reply #466 on: November 01, 2010, 11:02:32 am »
Go Up Go Down

From the video in your mentioned web page, we can see that this circuit also has instability problem. it makes a sound frequently or sometimes randomly without the presence of metal. 

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,28024.msg198935.html#msg198935




Logged
Offline vourvon
Bronze Member
*

Join Date: May, 2009
Thank you11

Activity
0%
Male
Philippines
Posts: 147
Referrals: 0

475.00 Gold
View Inventory

Awards

MD-5008, V4 Automax & Nokta Golden King
« Reply #467 on: November 01, 2010, 06:54:24 pm »
Go Up Go Down

japanese,

    Thank you for prompt response and I will do what you share. Another request can you elaborate the function of the following:

P3: Noise / Pulse Width = ?
P1: Signal / Delay = ?
P2: Sense / Range = ?
P4: Gain / Sense = ?
P5: Threshold / Threshold = ?
P6: Volume / None = ?

The 1st column is the name from Delta Pulse by Mikron Electronic and the 2nd is for Unified Delta Pulse fixed by kt315. Who of 2 are more proper calling. Anyone also invited to elaborate this and much better if you can post the manual instruction.

vourvon

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,28024.msg198936.html#msg198936




Logged
Offline japanese
Bronze Member
*

Join Date: Mar, 2010
Thank you55

Activity
0%

Egypt
Posts: 287
Referrals: 0

1625.00 Gold
View Inventory

Awards

GARY PI
« Reply #468 on: November 01, 2010, 07:39:08 pm »
Go Up Go Down

Hi vourvon
              i take ver 6 fixed by kt315.
best time
j.

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,28024.msg198937.html#msg198937




Logged
Offline LINE
Copper Member
*

Join Date: May, 2010
Thank you3

Activity
0%

Australia
Posts: 26
Referrals: 0

135.00 Gold
View Inventory

Awards

LF 960D FISHER
« Reply #469 on: November 03, 2010, 02:39:24 am »
Go Up Go Down

hi i made this power supply i dont if there errors, any comment and upgrade or modifcation is higly appreciated your opinion is important, thanks

Posted on: November 03, 2010, 03:28:07 AM
MY QUESTION FROM PAGE 45 HAS NOT BEEN ANSWERED I NEED HELP WITH THE DIAGRAM I SENT WHAT IS THE PURPOSE OF THE CIRCUIT NEXT TO POWER SUPPLY CIRCUIT OF SNIFFER XR71 IN CIRCLED FROM THE DIAGRAM.

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,28024.msg198938.html#msg198938




Logged
Print
Pages:  1 ... 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 ... 91   Go Up
Jump to:  

Powered by SMF 1.1.19 | SMF © 2005, Simple Machines | Sitemap
Copyright THunting.com