[x] Welcome at THunting.com!

A fun place to talk about Metal Detecting, Treasure Hunting & Prospecting. Here you can share finds and experience with thousands of members from all over the world

Join us and Register Now - Its FREE & EASY

THunting.com
Treasure Hunting & Metal Detecting Community
   
Advanced Search
*
Welcome, Guest! Please login or register HERE - It is FREE and easy.
Only registered users can post and view images on our message boards.
Did you miss your activation email?

Login with email, password and session length
Or Login Using Social Network Account
News:
Pages:  1 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 ... 44   Go Down
Print
Share this topic on FacebookShare this topic on Del.icio.usShare this topic on DiggShare this topic on RedditShare this topic on Twitter
Tags:
0 Members and 4 Guests are viewing this topic.
Offline Firebox
Pull Tab
*

Join Date: Sep, 2012
Thank you2

Activity
0%
Male
Germany
Posts: 24
Referrals: 0

120.00 Gold
View Inventory

Awards

XP Deus V2.0
« Reply #260 on: October 04, 2012, 08:08:17 am »
Go Up Go Down

Now i have build a coil with a Cat 6 e Networkcable. The erroneous signals are better. But on this version of coil i have to set the guard intervall up to 42!! the unshielded coil needs only 25 ....

What does the Barrier +/- Value changed?

By the way, which value for the L1 resistor on chance board is recommended? I would like to replace the resistor against a choke coil.


Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,7657.msg234358.html#msg234358



There are 2 attachment(s) in this post which you can not view or download

Please register for viewing them.

k-Spule_cat_4.jpg
k-test_netzwerkspule.jpg


Logged
Offline supergold
Pull Tab
*

Join Date: Mar, 2012
Thank you0

Activity
0%
Male
Portugal
Posts: 18
Referrals: 0

90.00 Gold
View Inventory

Awards
« Reply #261 on: October 04, 2012, 09:52:48 am »
Go Up Go Down

hello firebox, i have seen a post with cat5 cable 4 turns for chance pi with good results , for 400uh 1.7ohm the guard interval is near value 20, how is the sensibility to gold , copper and silver? and 1 euro coin?  the barrier is the gain, lower value more gain. the L1 value is 220uh , choose choke with 220uh and 500ma current value .

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,7657.msg234369.html#msg234369




Logged
Offline Firebox
Pull Tab
*

Join Date: Sep, 2012
Thank you2

Activity
0%
Male
Germany
Posts: 24
Referrals: 0

120.00 Gold
View Inventory

Awards

XP Deus V2.0
« Reply #262 on: October 04, 2012, 12:48:48 pm »
Go Up Go Down

Hi Supergold! the results of the networkcoil is good, but i can´t reduce the guard intervall lower than 42 and Barrier is 5:

50 Pfennig Silbermünze (German Silver Coin from 1877 ) detects the chance in 6,7 inches (17 cm)
1 Euro in 9 inches (23 cm)..... 5 Cent copper in 6 inches .....

today my chance become a new Display (blue) but thats very dark! without a Backlight i can see nothing on it! So i need permanent Backlight for the LCD!  The problem is, the chance doesent store the light status in memory, so i need a other method to set the backlight permanent ON

How can i do this ?

Regards


Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,7657.msg234374.html#msg234374



There are 5 attachment(s) in this post which you can not view or download

Please register for viewing them.

k-Drosselspule_L1.jpg
k-Speaker.jpg
k-neues_lcd_dunkel.jpg
k-neues_lcd_light.jpg
k-neues_lcd_light2.jpg


Logged
Offline supergold
Pull Tab
*

Join Date: Mar, 2012
Thank you0

Activity
0%
Male
Portugal
Posts: 18
Referrals: 0

90.00 Gold
View Inventory

Awards
« Reply #263 on: October 04, 2012, 01:19:53 pm »
Go Up Go Down

your problem will be small objects of gold , the detector will not  see them, give a try on that..., you have the guard interval on 42 because you have  too much inductance try another kind (type) of cable maybe cat5 with shield . ............ now the light,  disconnect the pin 16 cable from the PCB, and  connect on the display side with a resistor of 500 ohm or higher to ground on board if light is low reduce the value of the resistor until you get good light, then connect by switch.

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,7657.msg234375.html#msg234375




Logged
Offline Firebox
Pull Tab
*

Join Date: Sep, 2012
Thank you2

Activity
0%
Male
Germany
Posts: 24
Referrals: 0

120.00 Gold
View Inventory

Awards

XP Deus V2.0
« Reply #264 on: October 04, 2012, 03:29:18 pm »
Go Up Go Down

Hi Supergold ! Great, it works !!!  Pray
Thanks !!!  Waveing

Now i have a permanent backlight on my LCD  Kiss

Regards

Firebox

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,7657.msg234385.html#msg234385




Logged
Offline supergold
Pull Tab
*

Join Date: Mar, 2012
Thank you0

Activity
0%
Male
Portugal
Posts: 18
Referrals: 0

90.00 Gold
View Inventory

Awards
« Reply #265 on: October 04, 2012, 05:37:03 pm »
Go Up Go Down

you have a big choke there,  Grin almost the coil size  Shocked what inductance it is?

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,7657.msg234392.html#msg234392




Logged
Offline Firebox
Pull Tab
*

Join Date: Sep, 2012
Thank you2

Activity
0%
Male
Germany
Posts: 24
Referrals: 0

120.00 Gold
View Inventory

Awards

XP Deus V2.0
« Reply #266 on: October 04, 2012, 06:36:52 pm »
Go Up Go Down

  Grin Grin

Many people say that the L1 resistance choke is not a good solution on Chance Board. So I have took a choke coil like this one  Wink  it has 150 uHenry inductance, it should be better, but I do not feel any different to my old resistance choke  Sad


Name is:
TALEMA DPU150A3

Source:

You are not allowed to view links.
Please Register or Login

http://www.pollin.de/shop/t/MDg1OTA5OTk-/Bauelemente_Bauteile/Passive_Bauelemente/Spulen_Filter/Ringkerndrosseln_TALEMA_Serie_DPU.html



You mean i have a high inductance coil ?? I only have 380 uH and 1,7 Ohm on the networkcable Coil  Waveing  i think the problem is the shielding on the Cat 6e Cable not the inductance ...

regards

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,7657.msg234395.html#msg234395




« Last Edit: October 04, 2012, 06:49:12 pm by Firebox »
Logged
Offline Firebox
Pull Tab
*

Join Date: Sep, 2012
Thank you2

Activity
0%
Male
Germany
Posts: 24
Referrals: 0

120.00 Gold
View Inventory

Awards

XP Deus V2.0
« Reply #267 on: October 08, 2012, 10:06:00 am »
Go Up Go Down

today i have tested the chance on a massive copper gutter. I can see the icons on Display are getting higher, but there is no sound   Shocked

massive copper are gives a signal strenght, but no sound? is this possible?

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,7657.msg234544.html#msg234544




Logged
Offline supergold
Pull Tab
*

Join Date: Mar, 2012
Thank you0

Activity
0%
Male
Portugal
Posts: 18
Referrals: 0

90.00 Gold
View Inventory

Awards
« Reply #268 on: October 08, 2012, 12:13:20 pm »
Go Up Go Down

hello , switch off iron mask and try again.....

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,7657.msg234550.html#msg234550




Logged
Offline Firebox
Pull Tab
*

Join Date: Sep, 2012
Thank you2

Activity
0%
Male
Germany
Posts: 24
Referrals: 0

120.00 Gold
View Inventory

Awards

XP Deus V2.0
« Reply #269 on: October 08, 2012, 12:21:58 pm »
Go Up Go Down

Hi Supergold,

i have NO Iron Mask in my settings!  No no!

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,7657.msg234551.html#msg234551




Logged
Print
Pages:  1 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 ... 44   Go Up
Jump to:  

Powered by SMF 1.1.19 | SMF © 2005, Simple Machines | Sitemap
Copyright THunting.com