[x] Welcome at THunting.com!

A fun place to talk about Metal Detecting, Treasure Hunting & Prospecting. Here you can share finds and experience with thousands of members from all over the world

Join us and Register Now - Its FREE & EASY

THunting.com
Treasure Hunting & Metal Detecting Community
   
Advanced Search
*
Welcome, Guest! Please login or register HERE - It is FREE and easy.
Only registered users can post and view images on our message boards.
Did you miss your activation email?

Login with email, password and session length
Or Login Using Social Network Account
2
News:
Pages:  1 2 3 4   Go Down
Print
Share this topic on FacebookShare this topic on Del.icio.usShare this topic on DiggShare this topic on RedditShare this topic on Twitter
Tags:
0 Members and 1 Guest are viewing this topic.
Offline vourvonTopic starter
Bronze Member
*

Join Date: May, 2009
Thank you11

Activity
0%
Male
Philippines
Posts: 147
Referrals: 0

475.00 Gold
View Inventory

Awards

MD-5008, V4 Automax & Nokta Golden King
« on: December 03, 2009, 02:53:36 am »
Go Up Go Down



     The 680 ohm resistor [R6] below the IRF 740 should be 1k ohm resistor . Also on the component layout they are using a 2.2 k ohm damping resistor which is high , the 680 ohm damping resistor on the schematic seems more realistic . They did not use R51 , the purpose of R51 is to reduce current on the IRF 740 if your seach coils DC resistance is less than 2.0 ohms , I see it on the schematic but it is missing on the PCB component Lay-Out , That is why they put the two blue jumpers from IRF740 to the -12 supply . The ST TH1220 is not being used but must be added . So what I am seeing now are just little problems . I need to continue and check the whole circuit . Eugene

 
Eugene
      I get the unified Delta Pluse & Sniffer XR-71 schematic with the PCB lay-out but if verify the correctness of lay-out you found have different in R5 680 1W versus 2.2K 1W, R6 1K versus 680 and if I'm correct I can't see the R50 and R51 also the 10,000uf versus 1,000uf. Which is correct the schematic or the lay-out.

       The ISIS schematic for Delta Pulse 1 potention meter name is Signal, Sniffer XR-71 potention meter name is Sense and Unified DP & S XR-71 potention meter name is Delay if you compare which 1 is correct or it depend what schematic you used but in actual use of this detector there is an difference. Please advise. Thanks.

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9706.msg60957.html#msg60957



There are 3 attachment(s) in this post which you can not view or download

Please register for viewing them.

Delta XR71 Latest schematic FINAL.jpg
XR-71xx.pdf
yerle-Delta pulse.jpg


« Last Edit: December 03, 2009, 11:17:44 am by Eugene52 »
Logged
Offline ram
Silver Member
*

Join Date: Jul, 2007
Thank you148

Activity
0%

Portugal
Posts: 814
Referrals: 0

5270.00 Gold
View Inventory

Awards
« Reply #1 on: December 03, 2009, 09:54:25 am »
Go Up Go Down

for me i use this schematic, with modification.

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9706.msg60981.html#msg60981



There are 2 attachment(s) in this post which you can not view or download

Please register for viewing them.

Delta Pulse_XR71_sch2009.jpg
delta pulse.pdf


Logged
Offline Eugene52
M.D. Electronic Builders Club
Moderator
Gold Member
*****

Mood:Happy
Happy

M.D. Electronic Builders Club
Join Date: Dec, 2008
Thank you397

Activity
0%
Male
United States
Posts: 2630
Referrals: 0

17957.00 Gold
View Inventory

Awards

Teknetics , Fisher , Discovery3300 and TIANXUN 19 kHz VLF Metal Detector
« Reply #2 on: December 03, 2009, 11:41:41 am »
Go Up Go Down


 
Eugene
      I get the unified Delta Pluse & Sniffer XR-71 schematic with the PCB lay-out but if verify the correctness of lay-out you found have different in R5 680 1W versus 2.2K 1W, R6 1K versus 680 and if I'm correct I can't see the R50 and R51 also the 10,000uf versus 1,000uf. Which is correct the schematic or the lay-out.

       The ISIS schematic for Delta Pulse 1 potention meter name is Signal, Sniffer XR-71 potention meter name is Sense and Unified DP & S XR-71 potention meter name is Delay if you compare which 1 is correct or it depend what schematic you used but in actual use of this detector there is an difference. Please advise. Thanks.
[/quote]

Hello Vourvon . Ram was successful with the schematic and pcb files he used .
To answer your questions Vourvon , download a copy of the Delta zip FINAL file I posted here . Everything should be complete and accurate .
Regards........Eugene

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9706.msg60990.html#msg60990



There are 1 attachment(s) in this post which you can not view or download

Please register for viewing them.

Delta_Snifferxr71_single_side_pcb-_ready_to_build_FINAL_11-22-09.zip


Logged

Let's Talk Treasure right here on Thunting.com

Offline vourvonTopic starter
Bronze Member
*

Join Date: May, 2009
Thank you11

Activity
0%
Male
Philippines
Posts: 147
Referrals: 0

475.00 Gold
View Inventory

Awards

MD-5008, V4 Automax & Nokta Golden King
« Reply #3 on: December 03, 2009, 06:41:04 pm »
Go Up Go Down

Ram,

     Thanks for the answer my attachment came from your previous post so if you use or follow the schematic you modify the PCB lay-out according to the circuit and electronic component indicated in schematic diagram.

Eugene,

     I mean which is I follow the schematic or the PCB lay-out with electronic component value, because the PCB lay-out with electronic component value not follow the schematic and have the difference, my thinking is that the PCB lay-out with electronic component value is already enhance or improve that why have difference in the schematic or vise-versa. Because I have plan to assemble that MD instead I buy twobox I need back-up MD for my Nokta Golden King and later on if assemble unit is success I plan put a arc-geo logger of TW. I work in electronic company and I handle auto-insertion and surface mounting machine and many electronic parts throw by the machine, good parts but cannot feed to machine so every month a have an ave. worth of $1,000 electronic component cannot use, maybe all resistor and capacitor use for assemble MD was came from machine throw. Please advise.

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9706.msg61047.html#msg61047




Logged
Offline farah676
Foil
*

Join Date: Jan, 2010
Thank you0

Activity
0%
Posts: 2
Referrals: 0

10.00 Gold
View Inventory

Awards
« Reply #4 on: January 10, 2010, 09:01:09 pm »
Go Up Go Down

Hi dear friends please upload Sniffer xr71 full(pcb+schematic+coil)
Thancks Very Very Much

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9706.msg67433.html#msg67433




Logged
Offline Tuxnor
Bronze Member
*

Join Date: Dec, 2009
Thank you9

Activity
0%
Male
Sweden
Posts: 121
Referrals: 0

227.00 Gold
View Inventory

Awards

Xp Deus V3.2 ,Garrett at gold , Whites GMT,Whites surf pi silverdog UK clone,Trevor Hill gold pic 3,Deltapulse,Garys pulse-2
« Reply #5 on: January 14, 2010, 08:22:05 am »
Go Up Go Down

Work in progress...boring ,,,,drilling..got all components x 5
what with this jumper..shall it be on or off ?
what with this jumper..shall it be on or off ?

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9706.msg68122.html#msg68122



There are 4 attachment(s) in this post which you can not view or download

Please register for viewing them.

13.01.2010 007.jpg
13.01.2010 008.jpg
13.01.2010 009.jpg
korresjon deltapulse.jpg


Logged
Offline ILIO51
Foil
*

Join Date: Apr, 2010
Thank you0

Activity
0%

Italy
Posts: 1
Referrals: 0

5.00 Gold
View Inventory

Awards

garrett 150
« Reply #6 on: May 11, 2010, 03:53:37 am »
Go Up Go Down

Hi!
I got from Bulgaria the assembled PCB of SR 71 Sniffer and seems well assembled.

There is a shortform for connections, however there are no operating instructions....do someone has those?

Thanks

ILIO Shocked

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9706.msg91632.html#msg91632




Logged
Offline raff33
Copper Member
*

Join Date: Jan, 2009
Thank you1

Activity
0%

Morocco
Posts: 67
Referrals: 0

390.00 Gold
View Inventory

Awards
« Reply #7 on: May 13, 2010, 04:35:01 pm »
Go Up Go Down

hi vourvon,
you are right , the PCB lay-out with electronic component value not follow the schematic and have the difference, not yet ................ Angry
 * c1=15nf or 22nf  * c7=220uf or 1000uf * R1=680k or 470k * R5=2k2 1w or 680R 1w * R6=680R or 1k * R47,49=2k or 1k * PR1=200k or 220k..........?
ok Eugen please corect the Delta zip FINAL file for helping peaple and many thanks.......
Regards...raff

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9706.msg92276.html#msg92276




Logged
Offline hamed_s
Pull Tab
*

Join Date: Sep, 2011
Thank you0

Activity
0%

Australia
Posts: 9
Referrals: 0

75.00 Gold
View Inventory

Awards
« Reply #8 on: October 22, 2011, 05:58:23 am »
Go Up Go Down

hi
what do tp1 and tp2 and .... mean?


Posted on: October 22, 2011, 05:35:35 AM
Quote:Posted by vourvon

     The 680 ohm resistor [R6] below the IRF 740 should be 1k ohm resistor . Also on the component layout they are using a 2.2 k ohm damping resistor which is high , the 680 ohm damping resistor on the schematic seems more realistic . They did not use R51 , the purpose of R51 is to reduce current on the IRF 740 if your seach coils DC resistance is less than 2.0 ohms , I see it on the schematic but it is missing on the PCB component Lay-Out , That is why they put the two blue jumpers from IRF740 to the -12 supply . The ST TH1220 is not being used but must be added . So what I am seeing now are just little problems . I need to continue and check the whole circuit . Eugene

 
Eugene
      I get the unified Delta Pluse & Sniffer XR-71 schematic with the PCB lay-out but if verify the correctness of lay-out you found have different in R5 680 1W versus 2.2K 1W, R6 1K versus 680 and if I'm correct I can't see the R50 and R51 also the 10,000uf versus 1,000uf. Which is correct the schematic or the lay-out.

       The ISIS schematic for Delta Pulse 1 potention meter name is Signal, Sniffer XR-71 potention meter name is Sense and Unified DP & S XR-71 potention meter name is Delay if you compare which 1 is correct or it depend what schematic you used but in actual use of this detector there is an difference. Please advise. Thanks.




plz tell me about voltages of test points exactly



Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9706.msg199288.html#msg199288




Logged
Offline hod_shaer
Copper Member
*

Join Date: Mar, 2009
Thank you6

Activity
0%

Iran, Islamic Republic of
Posts: 35
Referrals: 0

225.00 Gold
View Inventory

Awards
« Reply #9 on: October 30, 2011, 10:53:42 am »
Go Up Go Down

Hello

I have made the sniffer xr71 on the breadboard ! But I don't know what is this "j1" (attached here) for ? Is it a kind of switch ? Do I have to do any work before turning the system on ?

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9706.msg199890.html#msg199890



There are 1 attachment(s) in this post which you can not view or download

Please register for viewing them.

j1.jpg


Logged
Print
Pages:  1 2 3 4   Go Up
Jump to:  

Powered by SMF 1.1.19 | SMF © 2005, Simple Machines | Sitemap
Copyright THunting.com