Hi,
my Lobo ST is running in "adjusted" mode now, I did play a bit with trimmer R33 (and K10 - only touch), and results are, after couple comparing test:
1. Frequency probably move, cause other LOBO ST with the same 10x12 HOT had no disturbed it the same style as before. In distance 3-4 meters - no any didggg rhriigg in headphones, only no any signal. Fantastic, but dangerous for club trips.
2. LST in disc mode in sens pure 10 and disc 2 and threshold 80-90% is going deeper then before (I cannot indexed other machines here, it is clear). Running over machines as have been never before.
3. In my standard former settings - Sens in red but no in max, Thresh in max, disc 1 and half and some - it is first time unstable, now. I can heard coil moving! Great! If is targeted good metal, disturb noise is quite and you can heard "standard" LST goose noise - clean and straight.
4. In this setting - adjusted - is better going in normal and for pinpointing switch to Black sand mode and it is OK.
5. GB for disc is I suppose at this moment negative, nice negative.
regards
litrfree
Linkback: You are not allowed to view links.
Please Register or Login
http://www.thunting.com/smf/index.php/topic,35618.msg220654.html#msg220654
|
|
Logged
|
litrfree
MD´s - Tejon DD 10x12" SEF DeTech, GPX 4500 DD 11", E-Trac 11" and 13", X-Terra 705 14x13" DD NEL, Nokta FORS CoRe, Garrett ProPointer. Tools: Drapper, Cannon EQS 20D camera. Membership: The Czech Metal detecting club Lovec Pokladu, The Czech Minelab club, Civic asociation Archeo LP 2010
|