The New DBP-2010 Corrected Schematic with a single circuit board !!

Eugene . If this is a complete set where are  K1 - K12  connected . And where is the parts list . I still will stick with my original DBP 2010 detector . As I said I built two units . Both of them are working to perferction . The module is necessary , even in your reworked design .  If you do not want to put the original schematic on the forum , I will do it . At least it is a proven project   .  Cornelius

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9219.msg57949.html#msg57949

Eugene . Don't get mad at me , but I have to get something off my chest . I have been following you for a long time and came to the following conclision . You never have given any member the complete picture of a project . They always have to come back to you and ask for some more information . A clear example is the DBP 2010 detector . You have never given the complete schematics to the members  . You know as well as I do that I gave you the complete information to build this PI detector . You had the PCB redrawn  ( and made some big booboo's ) . Now you call my design as absolete !  What are you trying to do my friend ?  You want some more attention to your way of dealing with our members . Are you trying to set up some business ? Are you collecting as many schematics as possible to sell them lateron . Or maybe make a kit out of them ? If you are thinking about it that way may I suggest to you that you are in the wrong place . What got me P'd off is that you called my design of the DBP 2010 as old .  You came out with something new although it was just a redrawn version of my design . You did not incude the module . You said this socalled new schematic included the module . But .....you were wrong here were'nt you ?  Eugene , change your ways ! I don't care wether I am banned from this forum , but I cannot stand your modus operandi . No hard feelings though . I am too old for that !  Cornelius

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9219.msg57987.html#msg57987

		Quote:			Posted by Cornelius
	Eugene . Don't get mad at me , but I have to get something off my chest . I have been following you for a long time and came to the following conclision . You never have given any member the complete picture of a project . They always have to come back to you and ask for some more information . A clear example is the DBP 2010 detector . You have never given the complete schematics to the members  . You know as well as I do that I gave you the complete information to build this PI detector . You had the PCB redrawn  ( and made some big booboo's ) . Now you call my design as absolete !  What are you trying to do my friend ?  You want some more attention to your way of dealing with our members . Are you trying to set up some business ? Are you collecting as many schematics as possible to sell them lateron . Or maybe make a kit out of them ? If you are thinking about it that way may I suggest to you that you are in the wrong place . What got me P'd off is that you called my design of the DBP 2010 as old .  You came out with something new although it was just a redrawn version of my design . You did not incude the module . You said this socalled new schematic included the module . But .....you were wrong here were'nt you ?  Eugene , change your ways ! I don't care wether I am banned from this forum , but I cannot stand your modus operandi . No hard feelings though . I am too old for that !  Cornelius

Hello Cornelius . Please go back a week or so and read the posts you wrote to me . It is all about what I am doing wrong on this Forum . Very little to do with the DBP-2010 circuit itself .
Everyone here on this forum knows I post a lot of schematics , files and documents . I like sharing information as much as I like reading everyone else's work on this forum . I try to post everything as complete as possible and I hold nothing back . If I do not post a missing file or document it means I do not have it or I have not seen it yet . And last if a schematic or PCB file has an error it was that way before it got posted here ....... Over the years and still today many other Metal Detector Technology / Electonic Forums are constantly correcting , modifying and improoving Metal Detector circuits , old and new !! .........Getting back to the DBP-2010 subject , If the files of the latest DBP-2010 I posted today prooves to work better and is easier to build then these will be the files to use and work from . I am now going to work on the files I posted today and answer some of my own questions . I think we will have quite a few more Members interested in building the DBP-2010 now .
Best Regards..........Eugene


Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9219.msg57992.html#msg57992

Dont bicker at one another. This is a VERY informative forum. Please...... keep the personal opinions OFF this forum !
I love hearing about these topics, even tho I can't contribute as much as others, or if my skills are not as honed. I wish I had more time to accomplish half of what I would like.
I DO have an idea for both, Eugene and Cornelius. That is to colaborate with each other, create a download section where COMPLETE schematics (hopefully tested) AND circuit board graphics can be posted, and downloaded and enjoyed by others.
PLEASE, dont ruin such an interesting topic by differences of opinion or how they present things.
You BOTH are held in HIGH esteem by others here. DONT let any of us down.......... PLEASE

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9219.msg58021.html#msg58021

		Quote:			Posted by Cornelius
	There is no hard feeling toward Eugene . He is doing a good job on this forum . What I have against him though is the vast stream of incomplete information .  For example take the DBP 2010 detector .  It looks like the old schematic , that has an additional modul part , is now renewed and all is put on one PCB . This however is not so . Look at the connections K1 through K12  . This shows that the module is not incorporated on the new PCB .   Again information that will throw us off course . For the rest  ,as I said  , I have nothing against Eugene .  Cornelius

I suggested this in the moderator's forum. Post the best, most complete set of documents you have in the downloads area where people can find them. I see no point in making anyone request a copy by e-mail when the solution is so simple.

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,9219.msg58036.html#msg58036