Inductance is the measuring instruments
Many long-time friend, feel a lack of measurement
There is no any critical materials. one must be careful to know the correct value of C, or any measurement of the absolute values are measured
cal circuit. is written on.
After making the circuit of the PC sound card Line in (Line Input - Blue jack) log.
Enter the registration line in the volume muted, level max. in it.
For example, I'm sorry I've used 470 nF measurement output in the 565 nf
CAL now. I am writing this value to the part zero measurements were incorrect.
If you do not have the possibility of measurement equipment for measuring the exact capacitor you know (you material 100uH) Connect the coil.
this value until you need to do is read the part of the program by CAL to enter different values and to enable you to see this in the form of inductance mH 0,100
When you see the program was calibrated to 0,100 mH. (LC circuit exactly know the value of C.)
Remove the coil is inserted to measure the coil and connect it.
Read end?ktansıdır the value of the coil.
And friends around the grounded coil nail wraps and nail affects the value of coil. About 10 rounds here, the more you wrap.
Japanese to paste the shape of coil distortion. After your nails are dry completely disassembled.
Measure the value of L in space again. Until it reaches the desired value rounds to dismantle or wrap round if necessary.
you're done.
success and good work.
link of the project:
You are not allowed to view links.
Please Register or Login
http://www.michaelgaedtke.de/SubMenu_Messen/L-Messung.htm
Linkback: You are not allowed to view links.
Please Register or Login
http://www.thunting.com/smf/index.php/topic,5010.msg31438.html#msg31438
|
|
Logged
|
|