Mont,
Go with the CZ 3d, get the 8" coil and the 5" coil, the 5" coil is deep.
The 3d will move old coins up in the high tone range, the CZ 5 is a good unit, but a V nickel will read as foil on the CZ 5, but on the 3d it will move the V nickel up into the high coins.
You may dig a little more trash with the 3d. but if you are hunting new coins only, then use the 3d in Salt mode....Run with Zero disc, you need tobe able to hear the low tones, like on a rusty nail,it will give a low tone and show iron, but when it comes off of the rusty nail it will jump to high tone and show as a high coin,,,,,now with iron notched out, all you will hear is the high tone and think its a coin. You get use to the sounds after a while.
I run my Sens at 4.5 and Vol at 5 and our ground will bal. out from 4.5 to 6.5, but most of the time,its on 5...
Hope this helps...HH...BJ
Linkback: You are not allowed to view links.
Please Register or Login
http://www.thunting.com/smf/index.php/topic,9290.msg62255.html#msg62255
There are 1 attachment(s) in this post which you can not view or downloadPlease register for viewing them. CZ 3D.jpg
|
|
Logged
|
|