Due to the massive amounts of additions to this post read it all and then look at the bottom for the better pictures. Thank you - Management homefire: According to the schematic 4066BE goes in U11, and the same as that picture before the schematic link post. I have a ton of diodes though and not enough spots to put them. Also I was thinking there should be a toggle switch for all metal to discrim. And there ain't no switch. hmm.
Does the TGSL kit have no switch?!
Posted on: August 31, 2011, 12:58:23 PM
Wait a second.. That picture isn't the same board layout at all.. Maybe you're right Homefire.
Posted on: August 31, 2011, 01:01:19 PM
Well at least all my diodes are in place! Thankfully I was lazy the other evening when I decided not to cut my fingernails. They've come in handy. lol.
Posted on: August 31, 2011, 01:42:32 PM
There, everything seems to be in order. homefire, after reviewing the geo forum for a bit i came across this and have been reassured by this photo that i'm on the right track with the correct parts. But it's OH SO confusing. musketeer, TGSL, and other coils for the IGSL.
I hope this pic and the troubles I've endured for a short while help other newbies like I, at this stage.
And if Silverdog reads this i apologize for the email I sent you from your site inquiring if i have the right parts. If for some reason I truly did get the wrong parts.. hey mistakes happen. My impatience is the only upsetting factor here. Impatience at time though. haha. All is well.
My grammar is too correct, I need another beer.
Posted on: August 31, 2011, 02:53:44 PM
I'm finding this to be very useful to double check my resistors:
I will take a picture when the sun is up. Why can't camera's be as good as the human eye in low lighting? Cameras need adaptability.. but oh no! then they become self aware! HAHA.
Posted on: August 31, 2011, 04:16:43 PM
| | Quote: | | | Posted by denizen | | | |
| why i have a ton of 48V diodes and only 2 slots on the board for them. | |
| | |
Ignore my ignorance.. I need to be led by concise Kindergarten instructions apparently. So Basically: if I can do it, then YOU can do this. I believe in the you that believes in me believing in you.
gotta have a little fun.
Posted on: August 31, 2011, 04:20:05 PM
I found it. the correct schematic for my build. the IGSL-TGSL coil build here is the post of a .bmp image:http://www.geotech1.com/forums/showpost.php?p=131323&postcount=203
A more convenient .jpg image is attached. Also all the parts are listed in the attached file as well. I am practically at home base now. My sleuthing is over. What a day.
Thank you Silverdog, D Bowers, Ivconic, et all for all the hard work and making this project available. To be continued.. tomorrow.
Linkback: You are not allowed to view links.
Please Register or Login
http://www.thunting.com/smf/index.php/topic,27269.msg193053.html#msg193053
http://i52.tinypic.com/f0xfe9.jpg
http://www.smpspowersupply.com/resistor/resistor_color_code.gif
There are 1 attachment(s) in this post which you can not view or downloadPlease register for viewing them. IGSL.jpg
|
« Last Edit: August 31, 2011, 11:58:55 pm by denizen »
|
Logged
|
|